Power Outer Mirror Inspection

POWER OUTER MIRROR INSPECTION

1. Disconnect the negative battery cable.

2. Remove the inner garnish. (See Inner Garnish Removal/Installation)

3. Remove the front door trim. (See Front Door Trim Removal/Installation)

4. Remove the power outer mirror. (See Power Outer Mirror Removal/Installation)

5. Apply battery positive voltage to the power outer mirror terminals and inspect the operation of the power outer mirror.






- If not as specified, replace the power outer mirror.





6. Inspect for continuity between the power outer mirror heater terminals.






- If not as specified, replace the power outer mirror.