Rear Door Speaker Removal/Installation

REAR DOOR SPEAKER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the sail garnish. Sail Garnish Removal/Installation

3. Remove the rear door trim. Rear Door Trim Removal/Installation

4. Remove in the order indicated in the table.










5. Install in the reverse order of removal.

Rear Door Speaker Installation Note

1. Remove the speaker with the wiring harness passing through the groove of the rear door module.






CAUTION:
- If the speaker is installed with the wiring harness out of the groove, an open circuit in the wiring harness could occur.