LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2008 >> B2300 L4-2.3L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Instrument Cluster / Carrier >> Testing and Inspection >> Pinpoint Tests >> Instrument Cluster >> Pinpoint Test 13

Pinpoint Test 13

PINPOINT TEST 13: THE RH TURN SIGNAL INDICATOR IS NEVER ON

Normal Operation
When the multifunction switch is in the RH TURN position, voltage is sent from the multifunction switch to the instrument cluster through circuit (GY/Y), and the RH turn signal indicator flashes on and off. The instrument cluster provides the bulb ground through circuit (B/Y).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- Instrument cluster

CAUTION: Use the correct probe adapter(s) when making measurements. Failure to use the correct probe adapters) may damage the connector.

Step 1-Step 4:




scientia non olet · About LEMON Manuals