No.3 Wheel Unit ID Registration Cannot Be Performed (TPMS Warning Light Flashes)
No.3 WHEEL UNIT ID REGISTRATION CANNOT BE PERFORMED (TPMS WARNING LIGHT FLASHES)Caution:
^ Activate the wheel unit ID registration mode using the M-MDS, and perform the following steps if the TPMS warning light does not turn off after driving at 25 km/h (15.5 mph) or more for 10 min or more.
Step 1-Step 4:
Display Of M-MDS (Example)
Registered ID: OxAAAAAAAA, OxBBBBBBBB, OxCCCCCCCC, and OxDDDDDDDD (AAAAAAAA, BBBBBBBB, CCCCCCCC, and DDDDDDDD mean arbitrary numbers.)
Unregistered ID: OxOOOOOOOO
Tire pressure: aaa kPa, bbb kPa, ccc kPa, ddd kPa (aaa, bbb, ccc, and ddd mean measurement value.)
*The battery is removed, the stored tire pressure is reset to 0 kPa.
Three registered wheel units and a replaced wheel unit
When A Replaced Wheel Unit Malfunctions:
When A Registered Wheel Unit Malfunctions:
When Two Registered Wheel Unit Malfunction:
When A Replaced Wheel Unit And A Registered Wheel Unit Malfunction:
When A Replaced Wheel Unit And Two Registered Wheel Units Malfunctions:
When Three Registered Wheel Units Malfunctions:
Two registered wheel units and two replaced wheel units
When A Replaced Wheel Unit Malfunctions:
When A Registered Wheel Unit Malfunctions:
When Two Replaced Wheel Units Malfunction:
When Two Registered Wheel Units Malfunction:
When A Replaced Wheel Unit And A Registered Unit Malfunction:
When Two Replaced Wheel Units And A Registered Wheel Unit Malfunction:
When A Replaced Wheel Unit And Two Registered Wheel Units Malfunction:
A registered wheel unit and three replaced wheel units
When A Replaced Wheel Unit Malfunctions:
When A Replaced Wheel Unit Malfunctions:
When A Replaced Wheel Unit And A Registered Wheel Unit Malfunction:
When Two Replaced Wheel Unit Malfunction:
When Two Replaced Wheel Units And A Registered Wheel Unit Malfunction:
When Three Replaced Wheel Units Malfunction:
