Pinpoint Test 3: TPMS Indicator Flashes When the Ignition Key Is Turned to the on Position and DTC B2872 Is Present

PINPOINT TEST 3: TPMS INDICATOR FLASHES WHEN THE IGNITION KEY IS TURNED TO THE ON POSITION AND DTC B2872 IS PRESENT

Note: If a warranty case is opened for an actual TPMS fault, document and include the actual tire pressure data in all warranty communications.

Normal Operation
If there is a fault in the TPMS system, such as a damaged sensor or module, DTCs are set in the SJB, the TPMS indicator will illuminate and the message center (if equipped) will display the appropriate message.

Possible Causes
^ TPMS sensor(s)
^ SJB

Step 1-Step 2:

Step 3-Step 4: