LEMON Manuals: Even more car manuals for everyone
Home >> Lincoln >> 2010 >> MKS AWD V6-3.7L >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Service and Repair >> Start/Stop Switch

Start/Stop Switch




Start/Stop Switch









Removal and Installation

1. Remove the instrument cluster finish panel extension. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Remove the 3 bolts and position the start/stop switch rearward.

3. Disconnect the electrical connector and remove the start/stop switch.

4. To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals