Interior Light Switch: Service and Repair

Ambient Lighting Switch









Removal and Installation

1. Remove the steering column opening trim panel. For additional information, refer to Instrument Panel - Exploded View in Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Remove the driver side register.

3. Remove the 4 headlamp switch bezel screws.

4. Disconnect the connectors and remove the headlamp switch bezel.

5. NOTE: The ambient lighting switch is removed by releasing the tabs and pushing from behind.

Release the tabs and remove the ambient lighting switch.

6. To install, reverse the removal procedure.