LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS 250 AWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Transmission and Drivetrain >> Drive Axles, Bearings and Joints >> Axle Shaft Assembly >> Testing and Inspection >> Component Tests and General Diagnostics >> Rear Drive Shaft Assembly

Rear Drive Shaft Assembly





DRIVE SHAFT: REAR DRIVE SHAFT ASSEMBLY: INSPECTION

1. INSPECT REAR DRIVE SHAFT ASSEMBLY

(a) Check that there is no excessive play in the outboard joint.





(b) Check that the inboard joint slides smoothly in the thrust direction.

(c) Check that there is no excessive play in the radial directions of the inboard joint.

(d) Check the boot for damage.
scientia non olet · About LEMON Manuals