LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS 250 AWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Steering and Suspension >> Wheels and Tires >> Tire Monitoring System >> Tire Pressure Monitor Receiver / Transponder >> Service and Repair >> Removal

Removal





TIRE AND WHEEL: TIRE PRESSURE WARNING ANTENNA: REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER LINER RH

3. REMOVE TIRE PRESSURE ANTENNA FRONT RH

(a) Disconnect the connector.





(b) Remove the nut and the front right tire pressure warning antenna assembly.

4. REMOVE REAR WHEEL LH

5. REMOVE REAR SEAT CUSHION ASSEMBLY Removal

6. REMOVE REAR SEATBACK ASSEMBLY Removal

7. REMOVE REAR FENDER LINER LH

8. REMOVE TIRE PRESSURE ANTENNA REAR LH

(a) Disconnect the connector.





(b) Remove the 2 nuts and the rear left tire pressure warning antenna assembly.