Reading and Clearing Diagnostic Trouble Codes

POWER STEERING: POWER STEERING SYSTEM: DTC CHECK / CLEAR

1. CHECK FOR DTCS

(a) Connect the Techstream (with CAN VIM) to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Read the DTCs. Enter the following menus: Chassis / EMPS / Trouble Codes.

(e) Confirm the details of the DTCs Power Steering System.

2. CLEAR DTCS

(a) Connect the Techstream (with CAN VIM) to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Clear the DTCs. Enter the following menus: Chassis / EMPS / Trouble Codes.

(e) According to the display on the Techstream, select the trouble code data display with the clear button.