Disassembly

STEERING COLUMN: STEERING COLUMN ASSEMBLY (for Power Tilt and Power Telescopic Steering Column): DISASSEMBLY

1. REMOVE STEERING LOCK ACTUATOR ASSEMBLY

(a) Using a center punch, mark the center of the 2 tapered-head bolts.

(b) Using a 3 to 4 mm (0.12 to 0.16 in.) drill, drill a hole in the 2 bolts.

(c) Using a screw extractor, remove the 2 bolts and steering lock actuator assembly from the steering column assembly.





2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU Removal