LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2011 >> IS 250 AWD V6-2.5L (4GR-FSE) >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag >> Service and Repair >> Removal and Replacement >> Front Passenger Side Knee Airbag Assembly >> Removal

Removal





SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: REMOVAL

1. PRECAUTION

CAUTION:
Be sure to read "PRECAUTION" thoroughly before servicing Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.

3. REMOVE FRONT DOOR SCUFF PLATE (w/o Illumination) Removal

4. REMOVE FRONT DOOR SCUFF PLATE (w/ Illumination) Removal

5. REMOVE FRONT DOOR OPENING TRIM COVER Removal

6. REMOVE INSTRUMENT SIDE PANEL Removal

7. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal

8. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

(a) Remove the 3 bolts and front passenger side knee airbag assembly.





(b) Disconnect the connector.

NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.