Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY: INSTALLATION

1. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY

(a) Connect the connector.





NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Install the front passenger side knee airbag assembly with the 3 bolts.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

2. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation

3. INSTALL INSTRUMENT SIDE PANEL Installation

4. INSTALL FRONT DOOR OPENING TRIM COVER Installation

5. INSTALL FRONT DOOR SCUFF PLATE (w/ Illumination)

6. INSTALL FRONT DOOR SCUFF PLATE (w/o Illumination)

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

8. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.