Register Light

LIGHTING (INT): REGISTER LIGHT: INSPECTION

INSPECTION

1. INSPECT REGISTER LIGHT (for LH Side)





(a) Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
(b) Check that the register light comes on.
OK:
Comes on
If the result is not as specified, replace the register light.
2. INSPECT REGISTER LIGHT (for RH Side)





(a) Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
(b) Check that the register light comes on.
OK:
Comes on
If the result is not as specified, replace the register light.
3. INSPECT REGISTER LIGHT (for Center)





(a) Connect a positive (+) lead from the battery to terminal 2 and a negative (-) lead to terminal 1.
(b) Check that the register light comes on.
OK:
Comes on
If the result is not as specified, replace the register light.