Front Door Lock

DOOR LOCK: FRONT DOOR LOCK: INSPECTION

INSPECTION

1. INSPECT FRONT DOOR LOCK ASSEMBLY LH
(a) Check the operation of the door lock motor.
(1) Apply battery voltage and check the operation of the door lock motor.





OK:






If the result is not as specified, replace the front door lock assembly LH.
(b) Check the operation of the door unlock detection switch.
(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:






If the result is not as specified, replace the front door lock assembly LH.
(c) Check the operation of the door key lock and unlock switch.
(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:






If the result is not as specified, replace the front door lock assembly LH.
2. INSPECT FRONT DOOR LOCK ASSEMBLY RH
(a) Check the operation of the door lock motor.
(1) Apply battery voltage and check the operation of the door lock motor.





OK:






If the result is not as specified, replace the front door lock assembly RH.
(b) Check the operation of the door unlock detection switch.
(1) Measure the resistance according to the value(s) in the table below.





Standard Resistance:






If the result is not as specified, replace the front door lock assembly RH.