Route cannot be Calculated

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION SYSTEM: Route cannot be Calculated

Route cannot be Calculated

INSPECTION PROCEDURE

PROCEDURE

1. CHECK MAP DISC




(a) Check that the map disc is not deformed or cracked.
OK:
No deformations or cracks on the map disc.
NG -- REPLACE MAP DISC
OK -- Continue to next step.

2. SET DESTINATION
(a) Set another destination and check if the system can calculate the route correctly.
OK:
Route can be correctly calculated.
NG -- PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK -- NORMAL OPERATION