Removal

AUDIO / VIDEO: AMPLIFIER ANTENNA: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system Service Precautions.
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ROOF HEADLINING ASSEMBLY
Removal
HINT: Refer to the procedures up to "Remove Roof Headlining Assembly".

3. REMOVE AMPLIFIER ANTENNA ASSEMBLY





(a) Disconnect the connector.
(b) Disengage the clamp and remove the 2 nuts.
(c) Disengage the clip and remove the amplifier antenna assembly.
NOTE:
If reusing the removed amplifier antenna assembly, do not touch the contact terminals.