Removal

1UR-FE ENGINE CONTROL: POWER STEERING OIL PRESSURE SWITCH: REMOVAL

1. REMOVE FAN AND GENERATOR V BELT

(a) Remove the fan and generator V belt Removal.

2. REMOVE FRONT WHEEL

3. REMOVE FRONT FENDER APRON SEAL RH Removal

4. DRAIN POWER STEERING FLUID

5. REMOVE POWER STEERING OIL PRESSURE SWITCH

(a) Disconnect the power steering oil pressure switch connector.





(b) Remove the power steering oil pressure switch.

(c) Remove the O-ring from the power steering oil pressure switch.