Removal

SEAT BELT: REAR NO. 2 SEAT INNER BELT ASSEMBLY: REMOVAL

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. REMOVE REAR NO. 2 SEAT ASSEMBLY LH

(a) Remove the rear No. 2 seat assembly LH Removal.

2. REMOVE REAR SEAT CUSHION LOWER HINGE COVER LH Disassembly

3. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH





(a) Using a T45 "TORX" socket wrench, remove the bolt and inner belt assembly.