Installation

SUPPLEMENTAL RESTRAINT SYSTEMS: FRONT SEAT SIDE AIRBAG ASSEMBLY: INSTALLATION

CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.

HINT
* Use the same procedure for the RH and LH sides.
* The procedure listed below is for the LH side.

1. INSTALL FRONT SEAT AIRBAG ASSEMBLY LH

(a) Install the side airbag to the seat frame with the 2 nuts.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

(b) Attach the wire harness 2 clamps.

2. INSTALL SEATBACK COVER WITH PAD Reassembly

3. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY Reassembly

4. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH Installation

5. INSTALL FRONT SEAT INNER CUSHION SHIELD LH Reassembly

6. INSTALL FRONT SEAT NO. 1 INNER CUSHION SHIELD LH Reassembly

7. INSTALL LUMBAR SWITCH ASSEMBLY Installation

8. INSTALL FRONT SEAT CUSHION SHIELD LH Reassembly

9. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB Reassembly

10. INSTALL RECLINING POWER SEAT SWITCH KNOB Reassembly

11. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY LH Reassembly

12. INSTALL FRONT SEAT ASSEMBLY LH

(a) Install the front seat assembly LH Installation.