Removal

1UR-FE ENGINE CONTROL: THROTTLE BODY: REMOVAL

1. REMOVE LOWER FRONT BUMPER COVER Removal

2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY Removal

3. DRAIN ENGINE COOLANT Service and Repair

4. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

5. REMOVE AIR CLEANER CAP AND HOSE Removal

6. REMOVE THROTTLE BODY ASSEMBLY

(a) Disconnect the No. 4 water by-pass hose and No. 12 water by-pass hose.





(b) Disconnect the throttle position sensor and control motor connector.

(c) Remove the 4 bolts, throttle body and gasket.





(d) Remove the No. 12 water by-pass hose from the throttle body.





(e) Remove the No. 4 water by-pass hose from the throttle body.