Installation

METER / GAUGE / DISPLAY: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.

(b) Attach the 2 clips.

(c) Install the combination meter assembly with the 2 screws.

2. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY Installation

3. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Driver Monitor Camera)

(a) Attach the guide.

(b) Attach the 4 claws.

(c) Attach the 2 clips to install the instrument cluster finish panel sub-assembly.

(d) Attach the 4 claws.

4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Driver Monitor Camera)

(a) Attach the guide.

(b) Attach the 4 claws.

(c) Attach the 2 clips to install the instrument cluster finish panel sub-assembly.

5. INSTALL NO. 1 INSTRUMENT PANEL FINISH CUSHION Installation

6. INSTALL LOWER STEERING COLUMN COVER (w/ Driver Monitor Camera)

7. INSTALL UPPER STEERING COLUMN COVER (w/ Driver Monitor Camera)

8. INSTALL NO. 2 SWITCH HOLE BASE Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

10. RESTORE AUTO-AWAY/RETURN FUNCTION

(a) Restore the Auto-away/Return function setting to the previous condition by changing the customize parameter Programming and Relearning.