Installation

EXTERIOR PANELS / TRIM: REAR SPOILER: INSTALLATION

HINT
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR SPOILER SUB-ASSEMBLY

(a) Attach the 3 clips to install the rear spoiler.

(b) Install the 6 bolts.

(c) Connect the connector.

2. INSTALL REAR SPOILER COVER RH

(a) Attach the 2 clips to install the rear spoiler cover.

3. INSTALL REAR NO. 1 SPOILER COVER

(a) Attach the 5 clips and fastening tape to install the rear No. 1 spoiler cover.