Installation

WINDOW / GLASS: BACK WINDOW LOCK: INSTALLATION

1. INSTALL BACK WINDOW LOCK ASSEMBLY

(a) Install the back window lock assembly with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the connector.

2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY Reassembly

3. INSTALL BACK DOOR LOCK COVER Reassembly

4. INSTALL TOOL CASE Reassembly

5. INSTALL UPPER TOOL BOX PANEL SUB-ASSEMBLY Reassembly

6. INSTALL BACK DOOR TRIM COVER Reassembly

7. INSTALL BACK DOOR SIDE GARNISH LH Reassembly

8. INSTALL BACK DOOR SIDE GARNISH RH Reassembly

9. INSTALL BACK DOOR CENTER GARNISH Reassembly