Rear Door Lock

DOOR LOCK: REAR DOOR LOCK: INSPECTION

1. INSPECT REAR DOOR LOCK ASSEMBLY LH





Text in Illustration





(a) Check the door lock motor operation.

(1) Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.

OK:





If the result is not as specified, replace the rear door lock assembly LH.

(b) Check the detection switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the rear door lock assembly LH.

2. INSPECT REAR DOOR LOCK ASSEMBLY RH





Text in Illustration





(a) Check the door lock motor operation.

(1) Apply battery voltage to the door lock motor connector and check the operation of the door lock motor.

OK:





If the result is not as specified, replace the rear door lock assembly RH.

(b) Check the detection switch.

(1) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





If the result is not as specified, replace the rear door lock assembly RH.