Reading and Clearing Diagnostic Trouble Codes

CRUISE CONTROL: LANE DEPARTURE ALERT SYSTEM: DTC CHECK / CLEAR

1. CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Lane Keeping Assist / Trouble Code.

(e) Read the DTCs.

2. CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Lane Keeping Assist / Trouble Code.

(e) Clear the DTCs.