Reading and Clearing Diagnostic Trouble Codes

WINDOW / GLASS: POWER WINDOW CONTROL SYSTEM: DTC CHECK / CLEAR


1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Check for DTCs by following the directions on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.

2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
(e) Clear the DTCs by following the directions on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.