Removal

DRIVE SHAFT / PROPELLER SHAFT: PROPELLER SHAFT ASSEMBLY: REMOVAL

1. REMOVE TRANSFER HEAT INSULATOR






(a) Remove the 4 bolts and insulator.
2. REMOVE REAR PROPELLER SHAFT ASSEMBLY
(a) for Transfer Side:





(1) Place matchmarks on the propeller shaft flange and transfer flange.
(2) Remove the 4 nuts and 4 washers.
(b) for Differential Side:





(1) Place matchmarks on the propeller shaft flange and rear differential flange.
(2) Remove the 4 nuts, 4 bolts and 4 washers.
(c) Remove the rear propeller shaft.