Installation

AXLE AND DIFFERENTIAL: REAR DIFFERENTIAL CARRIER ASSEMBLY: INSTALLATION

1. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
(a) Install a new gasket.






(b) Install the differential carrier with the 10 washers and 10 nuts.
Torque: 72 Nm (734 kgf-cm, 53 ft-lbf)
2. CONNECT PROPELLER SHAFT ASSEMBLY






(a) Align the matchmarks on the propeller shaft flange and differential flange.
(b) Connect the propeller shaft with the 4 bolts, 4 washers and 4 nuts.
Torque: 88 Nm (900 kgf-cm, 65 ft-lbf)
3. INSTALL REAR AXLE SHAFT
(a) Install the axle shaft Installation.
4. ADD DIFFERENTIAL OIL Service and Repair