Removal

SEAT BELT: REAR NO. 1 SEAT INNER BELT ASSEMBLY (for RH Side): REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
NOTICE:
- w/ Navigation System:
After the engine switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and settings. As a result, after turning the engine switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery terminal.
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE REAR NO. 1 SEAT ASSEMBLY RH
(a) Remove the rear No. 1 seat assembly Removal.
3. REMOVE REAR NO. 1 SEAT RECLINING COVER LH Disassembly







4. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
(a) Remove the bolt and belt.