Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION





1. INSTALL FRONT SEAT INNER BELT ASSEMBLY
(a) Install the front seat inner belt assembly with the nut.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTICE:
Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

(b) Connect the 3 connectors and attach the clamps.
2. INSTALL FRONT SEAT ASSEMBLY
(a) Install the front seat assembly Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. CHECK SRS WARNING LIGHT Installation

5. INSPECT FRONT SEAT ASSEMBLY Installation