Removal

EXTERIOR PANELS / TRIM: MUDGUARD: REMOVAL






1. REMOVE FRONT FENDER MUDGUARD LH
(a) Remove the clip.
(b) Using a T30 "TORX" socket, remove the 4 screws and mudguard.
2. REMOVE FRONT FENDER MUDGUARD RH
HINT:
Use the same procedures described for the LH side.





3. REMOVE REAR QUARTER PANEL MUDGUARD LH
(a) Remove the clip.
(b) Using a T30 "TORX" socket, remove the 7 screws and mudguard.






4. REMOVE REAR QUARTER PANEL MUDGUARD RH
(a) Remove the clip.
(b) Using a T30 "TORX" socket, remove the 8 screws and mudguard.