Seat Heater System

SEAT: SEAT HEATER SYSTEM: ON-VEHICLE INSPECTION


1. INSPECT SEAT HEATER CONTROL SUB-ASSEMBLY (for Front Side)





(a) Disconnect the c13 and c1 heater control connectors.
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:

for LH





for RH





If the result is not as specified, there may be a malfunction on the wire harness side.
(c) Measure the voltage according to the value(s) in the table below.
Standard Voltage:

for LH





for RH





If the result is not as specified, there may be a malfunction on the wire harness side.
(d) Connect the c13 and c1 heater control connectors.






(e) Measure the voltage according to the value(s) in the table below.
Standard Voltage:










If the result is not as specified, the seat heater control may have a malfunction.