Rear Door Speaker

AUDIO / VIDEO: REAR DOOR SPEAKER: INSPECTION





1. INSPECT REAR SPEAKER SET
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





- *1: for 19 Speakers
- *2: for 9 Speakers
If the result is not as specified, replace the rear speaker set.






2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY (for 19 Speakers)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:





If the result is not as specified, replace the rear No. 2 speaker assembly.
3. INSPECT REAR NO. 3 SPEAKER ASSEMBLY (for 19 Speakers)
(a) When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.
OK:
Malfunction disappears.
HINT:
- Connect all the connectors to the rear No. 3 speakers.
- When there is a possibility that either the right or left rear speaker is defective, inspect by interchanging the right one with the left one.
- Perform the inspection above on both LH and RH sides.