Installation

NAVIGATION / MULTI INFO DISPLAY: NAVIGATION ANTENNA: INSTALLATION





1. INSTALL NAVIGATION ANTENNA ASSEMBLY
(a) Install the antenna with the 2 screws.
(b) Attach the 2 clamps.
2. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Install the instrument panel safety pad Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. INSTALL ENGINE ROOM SIDE COVER LH Installation

5. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.