LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2012 >> Wrangler V6-3.6L >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Auxiliary Power Outlet >> Service and Repair >> Power Outlet - Removal >> 115 V Power Outlet

115 V Power Outlet





REMOVAL

Special Tools:










1. Disconnect and isolate the negative battery cable.
2. Open the center console.
3. Using a trim stick or equivalent gently pry up on the 115V power outlet assembly to remove.
4. Disconnect the electrical connector (1) from the 115V power outlet.





5. Push in on the four tabs (1) to release the 115V power outlet (2) from the bracket (3).