Instrument Cluster Bezel - Installation

INSTALLATION





1. Position the bezel (2) into place and seat the 19 clips (1) fully.





2. Install the screws (3).
3. Install the screw (2) in the switch/bin opening.
4. Install the storage bin screw (1) and position the bin mat back into place.





5. Position the window switch assembly (2) and connect electrical harness connectors.
6. Position the switch and press into place, engaging the integrated latches.
7. Position the storage bin, if equipped, back and seat fully.





8. Install the HVAC outlets (1).Air Outlet - Installation





9. Install the HVAC outlets (1).Air Outlet - Installation
10. Install the steering column opening cover (3). Steering Column Opening Cover - Installation