Amplifier - Installation

INSTALLATION





1. Connect the amplifier electrical connector and install the amplifier (2).
2. Install the amplifier mounting fasteners (1).





3. Install the speaker by carefully pulling the left side of the instrument panel (1) outward until there is sufficient room to install the speaker through the end cap area.





4. Connect the speaker electrical connector.
5. Install the driver side lower speaker mounting retainer (1).





6. Install the speaker mounting fasteners (1).





7. Install the driver side lower instrument panel retainer (1) next to the DLC connector.





8. Install the instrument panel cover steering column opening cover retainers (1).





9. Install the reinforcement plate and steering column opening cover Steering Column Opening Cover - Installation.





10. Install the instrument panel end cap (1).
11. Connect the negative battery cable.