LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2011 >> Wrangler V6-3.8L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Seals and Gaskets >> Valve Guide Seal >> Service and Repair >> Valve Guide Seals - Installation

Valve Guide Seals - Installation






INSTALLATION

1. Install the valve stem seal squarely over the valve guide, using the valve stem as a guide. Do not force the seal against top of the valve guide.
2. Install the valve spring. Valve Springs - Installation
scientia non olet · About LEMON Manuals