Quarter Trim Panel - Installation

INSTALLATION





1. Position the quarter trim tabs (3) into the appropriate slots in the body and seat the trim (2) fully.
2. Install the cargo hook and retainer if necessary.





3. Position the liftgate scuff plate (1) onto the liftgate sill and seat the retaining clips (2) fully.





4. Position the seat latch striker trim (1) back into place and seat fully.





5. Fold the seat back up and install the door sill scuff plate (3), Scuff Plate - Installation.





6. Position the cargo floor into the vehicle and engage the rear pivots.
7. Seat the floor cover fully.