Front Bumper Fascia - Installation

INSTALLATION

Compass





1. Install the fascia (4) onto the fasteners (5 and 6).
2. Install the fasteners (1 and 2).
3. Install the push pin fasteners (3).

Patriot





1. Position the fascia (4) onto the front of the vehicle and install the push pin fasteners (1 and 2).
2. Install the screws (3).
3. Install the screws (5) from inside the wheel wells.
4. Install the push pin fasteners (6) from inside the wheel wells.

Compass and Patriot





1. Install the fasteners (4) and connect the electrical connectors (2 and 3).





2. Install the fascia (2) to splash shield screws (1).