LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Commander 2WD V6-3.7L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Third Row Seat - Removal

Third Row Seat - Removal






REMOVAL





1. Remove the cargo load floor (1) Load Floor - Removal.





2. Remove the inner nut and bolt (2).
3. Remove the outer nuts (3).
4. Lift seat assembly up off of the studs (1) and release the front hooks from the strikers (4).
5. Remove the seat.





6. Remove the bolt (5) and remove the lower seat belt anchor (4).