LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander 4WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Valve Cover >> Service and Repair >> Cylinder Head Cover(s) - Removal

Cylinder Head Cover(s) - Removal






REMOVAL





1. Disconnect negative battery cable.
2. Disconnect ignition coil connector (1).
3. Remove ignition coil retaining bolts (3).





4. Remove ignition coil (1).





5. Remove cylinder head cover retaining bolts.





6. Remove cylinder head cover (1).

NOTE: The gasket (2) may be used again, provided no cuts, tears, or deformation have occurred.


scientia non olet · About LEMON Manuals