LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass 4WD L4-2.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Cooling System >> Coolant Reservoir >> Service and Repair >> Coolant Recovery Container - Installation

Coolant Recovery Container - Installation







GAS ENGINE





1. Engage coolant recovery container (6) into washer fluid reservoir (4).
2. Install coolant recovery container mounting bolt (2) and tighten to 4 Nm (35 in. lbs.).
3. Connect hose (5) at upper radiator Tee (3).
4. Fill coolant recovery container to proper level.
scientia non olet · About LEMON Manuals