Quarter Trim Panel - Removal

REMOVAL





1. Lift the cargo floor up and disengage from the rear pivots.




2. Remove the door scuff plate (3), Door Sill Scuff Plate - Removal.




3. Fold the rear seat back into the down position.
4. Using a trim stick C-4755 or equivalent, remove the latch trim bezel (1).




5. Using a trim stick C-4755 or equivalent, release the retaining clips (2) and remove the liftgate scuff plate (1).




6. Remove the cargo hook and retainer, if equipped.
7. Separate the quarter trim panel (2) from the body and remove.