LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Removal and Replacement >> Assembly-Transmission Solenoid/TRS >> Removal

Removal







REMOVAL

NOTE: If the Transmission Solenoid/TRS Assembly is being replaced, the Quick Learn Procedure must be performed. Quick Learn Procedure





1. Remove the valve body from the transmission.Removal




2. Remove the bolts (1) holding the transmission solenoid/TRS assembly onto the valve body.
3. Separate the transmission solenoid/TRS assembly from the valve body.
scientia non olet · About LEMON Manuals