LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Instrument Panel, Gauges and Warning Indicators >> Driver/Vehicle Information Display >> Service and Repair >> Overhead Console - Removal

Overhead Console - Removal







REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Remove the inside rearview mirror, Interior Rearview Mirror - Removal.
3. Pull downward on the sides of the overhead console housing (3) firmly and evenly to disengage the snap clips from the overhead console bracket.




4. Lower the overhead console from the headliner far enough to access the wire harness connectors.
5. Disconnect the roof wire harness connectors from the Electronic Overhead Module (EOM) (3) and combination power sunroof/liftgate switch (2) if equipped.
6. Remove the overhead console from the vehicle.