LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Pump >> Service and Repair >> Removal and Replacement >> Engine Oil Pump - Installation

Engine Oil Pump - Installation







INSTALLATION





1. Position the oil pump onto the crankshaft and install the 4 oil pump retaining bolts.
2. Tighten the oil pump retaining bolts to 28 Nm (250 in. lbs.).
3. Install the timing chain coverTiming Cover - Installation.
4. Install the pick-up tube and oil panEngine Oil Pan - Installation.
scientia non olet · About LEMON Manuals