LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander 2WD V8-5.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Radio/Stereo >> Service and Repair >> Removal and Replacement >> Installation

Installation







INSTALLATION





1. Connect antenna cable (3) to radio (1).




2. Connect the electrical harness connector to radio.
3. Position radio to instrument panel. Install and tighten mounting fasteners.
4. Install instrument panel bezel. Instrument Panel Bezel - Installation.
scientia non olet · About LEMON Manuals