Front Bumper Cover / Fascia: Service and Repair

FRONT FASCIA

REMOVAL

1. Raise and support vehicle.
2. Turn front wheels to access rivets and remove plastic rivets attaching fascia to wheel liner.






3. Remove bolts attaching fascia to fender.






4. Remove plastic push pin fasteners attaching front fascia to lower radiator crossmember splash shield.
5. Disengage fog lamp connectors, if equipped.






6. Remove screws attaching fascia/grille to upper radiator crossmember.
7. Slide fascia forward to separate from vehicle

INSTALLATION

1. Slide fascia onto vehicle engaging fascia with tabs on bottom of front fenders.






2. Install screws attaching fascia/grille to upper radiator crossmember.






3. Install bolts attaching fascia to fender.
4. Engage fog lamp connectors, if equipped.
5. Install plastic rivets attaching fascia to wheel liner.






6. Install plastic push pin fasteners attaching front fascia to lower radiator crossmember splash shield.
7. Remove supports and lower vehicle.